Ansi Z535.5 Definitions - Hussmann RL2W Installation & Operation Manual

P/N 3053328_C
INSTALLATION
TOOL LIST
Unloading From Trailer:
Lever Bar (also known as a Mule,
Johnson Bar, J-bar, Lever Dolly, and
Moving Dolly
Setting Case Line-Up:
Level, 4 ft suggested
1/
5
/
1/
Battery Drill/Screw Gun
Caulking Gun
10 in. Adjustable Crescent Wrench

ANSI Z535.5 DEFINITIONS

• DANGER – Indicate[s] a hazardous
!
situation which, if not avoided, will
result in death or serious injury.
• WARNING – Indicate[s] a hazardous
!
situation which, if not avoided, could
result in death or serious injury.
• CAUTION – Indicate[s] a hazardous
!
situation which, if not avoided, could
result in minor or moderate injury.
• NOTICE – Not related to personal injury –
Indicates[s] situations, which if not avoided,
could result in damage to equipment.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
pry lever)
Ratchet
in. Socket
4
in. Socket
16
in. Socket
2
REVISION HISTORY
REVISION C — APRIL 2019
1. Added new medium temp. models
REVISION B — FEBRUARY 2019
1. Added new low temp. models; updated
Section 2
REVISION A — MARCH 2018
1. Original Issue
A 4-inch (102 mm) space between
the rear of the merchandiser and wall
must be maintained for air circulation.
However, in high ambient conditions,
sweating may still occur. If this
happens install a method of forced
ventilation such as a fan ventilation kit.
Do NOT remove shipping crate until
the merchandiser is positioned for
installation.
Excessive ambient conditions may
cause condensation and therefore
sweating of doors. Facility operators
should monitor doors and floor
conditions to ensure safety of
persons.
v
Reach-In