Table of Contents
Advertisement
Safety and General Specifications
Weight
Dimensions
AC input
Network Analysis Interface
Network Analysis interface LEDs
Capture Memory
Serial Configuration Port
Management Port
Shock and vibration
Laser
Operating Temperature
Connection to public telephone
network
Safety
EMC
Table 3. General Specifications
1.7 kilograms (3.8 lbs)
4.1 x 21.1 x 32.8 cm (1.6 x 8.3 x 12.9 in), one
half of a standard 19 in rack mount width
85 to 265 VAC; 47/63 Hz; 25 watts
10/100BASE-T, (RJ-45), 100BASE-FX (SC
fiber), 1000BASE-X (SX-GBIC ,LX-GBIC and
TX-GBIC)
Link, Utilization, Transmit, Collision, Errors
64 Mbytes (OptiView
Gigabit models)
Serial RS-232 (9-pin male)
10/100BASE-T (RJ-45) Ethernet
Meets requirements of MIL-PRF-28800F for
Class 3 equipment
Class 1 Laser Product, complies with 21 CFR
1040.10 & 1040.11, CFR(J)
10 ° C to 30 ° C (50 ° F to 86 ° F) with up to 95%
Relative Humidity
10 ° C to 40 ° C (50 ° F to 104 ° F) with up to 75%
Relative Humidity
Non-Operating Temperature-20 ° C to +60 ° C (-
4 ° F to +140 ° F )
The analyzer network interfaces are NOT FOR
CONNECTION TO PUBLIC TELEPHONE
SYSTEMS. The analyzer should only be
connected to the public phone network through
regulatory agency compliant modem devices.
Complies with CSA C22.2 No. 950 Cana-
dian standards, and UL 1950 (US standards)
Complies with European Union directive
EN60950 2
Complies with EN61326 Class A.
Workgroup Analyzer
Safety and General Specifications
Workgroup Pro and Pro
TM
nd
edition.
35
Advertisement
Table of Contents
