Table of Contents
Advertisement
Before You Start
Safety Information
The OptiView
complies with:
•
Class 1 Laser product 21 CFR 1040.10 & 1040.11, CFR(J)
•
CSA C22.2 No 950, and EN60950 2
The following symbols are used throughout this document:
j NOT FOR CONNECTION TO PUBLIC TELEPHONE SYSTEMS
W PLEASE READ MANUAL FOR SAFETY
To avoid possible electric shock or personal injury, follow
these guidelines:
•
Do not use this product if it is damaged. Before using
the product, inspect the case. Look for cracked or
missing plastic. Pay particular attention to the
insulation surrounding the connectors.
•
Do not operate the product around explosive gas,
vapor or dust.
•
When servicing the product, use only specified
replacement parts.
•
This product contains a Class I laser (OptiView
Workgroup Pro and Pro Gigabit models), looking into
the laser port may cause eye damage.
•
Do not connect a telephone line to this product.
•
If this product is used in a manner not specified by the
manufacturer, the protection provided by the product
may be impaired.
To avoid possible damage to the analyzer and to the
equipment under test, follow these guidelines.
•
Use the proper terminals and cable for all connections.
Workgroup Analyzer (hereafter referred to as the "analyzer")
TM
W
Warnings
W
Cautions
nd
edition
TM
1
Advertisement
Table of Contents
