Appendix A Change Application Parameters - Hach TitraLab AT1102 User Manual

Hide thumbs Also See for TitraLab AT1102:
Table of Contents

Advertisement

Appendix A Change application parameters

Parameter
Description
Name
Name of the application
Advisable syringe
The application has been designed with this type of syringe
Parameter
Description
Name
Name of the sample
Amount
Amount of the sample
Unit
Unit of the sample
Min. amount
Minimum permitted sample amount
Max. amount
Maximum permitted sample amount
Resolution
Number of decimals to show for the sample amount
Parameter
Name
Parameter
Description
Description
Description of the blank
The applications installed on the instrument have been pre-defined to optimize the measurement
process. Changing these default application parameters will have an effect on the measurement
process and measurement results. Only qualified personnel should change these parameters or
use the instrument in Expert mode. Refer to the application note before changing any
parameters.
In Basic mode changes to parameters are secure. In Expert mode changes to parameters are
not secure and can cause the application to run incorrectly.
The Active parameter is available to change in some parameter groups. It specifies if the method
should be used during the analysis. Changing this from Yes to No means that the method will not
be used which will have an effect on the measurement process and measurement results.
The Hide result parameter (e.g. R2 hide, R3 hide, etc.) is available to change in some parameter
groups. It specifies if the result is shown on the display. Changing this from Yes to No means that
the calculated measurement result will not be shown. This will not have an effect on the
measurement process and measurement results.
The parameters available for change can be different for each instrument configuration
and the application being edited. The parameters marked with an "x" are available for
change.
Table 18 Application
Table 19 Sample
Description
Name of the QC
N O T I C E
N O T I C E
N O T I C E
N O T I C E
Table 20 QC
Basic mode
x
Table 21 Blank
Basic mode
Basic mode
Expert mode
x
Basic mode
Expert mode
x
x
Expert mode
x
Expert mode
x
x
x
x
x
x
x
x
x
63

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents