Install The Sensor Storage Tubes; Install The Stir Bar And The Beaker; Prepare The Tubes - Hach TitraLab AT1102 User Manual

3.4 Install the sensor storage tubes

3.5 Install the stir bar and the beaker

3.6 Prepare the tubes

Put the three sensor storage tubes into the holder that is on the side of the instrument
(refer to Product overview
Add the stir bar to the beaker, and then attach the beaker to the sensor holder.
Remove any bends in the end of the tubes.
on page 7). Keep the sensor in a storage tube when not in use.
Installation
13