Set The Legacy Adapter Settings; Connect The Sensor - Hach TitraLab AT1102 User Manual

1 Temperature sensor
3.8.1.1

Set the legacy adapter settings

3.8.2 Connect the sensor

2
The options shown are based on the parameter selected on the legacy adapter commisioning wizard.
2 Reference sensor
3. The legacy adapter commissioning wizard automatically starts. Follow the instructions
that show on the display. Select the parameter based on the connected sensor.
Option
pH
Metal/RedOX/Color Select this parameter if the connected sensor is a Pt-Pt (metallic)
ISE
Refer to the application documentation to enter the related information for the
selected parameter.
Do the steps that follow to set a sensor name in the legacy adapter settings or set the
legacy adapter settings.
1. Make sure that the legacy adapter is connected to the instrument.
2. From the home screen, select Settings>Legacy settings and then push Select.
3. If more than one legacy adapter is connected, select the legacy adapter to change
the settings.
2
4. Select an option . Refer to the application notes for additional information.
Option
Input sensor name
Input manual
temperature
Input pHIso
Reset settings
Use a conical adapter to hold the sensor tightly in the sensor holder.
Description
Select this parameter if the connected sensor is a pH analogic sensor.
analogic sensor or PTM450/OPT300 sensor.
Select this parameter if the connected sensor is an ion selective
sensor.
Description
Enters the name of the sensor used. If specified, follow the
recommendations on the application notes for the sensor name.
Sets the temperature used in the titration if no temperature sensor
is connected.
(pH parameter only) Sets the pH ISO value (default=7).
Sets the legacy adapter settings to the default configuration. Starts
the legacy adapter commissioning wizard.
Installation
3 Measuring sensor
15