Manage The Data Log; Purge - Hach TitraLab AT1102 User Manual

7.5 Manage the data log

7.6 Purge

• The sample name for the next measurement made on 27th February 2015 at
17:01:27 is Water 2 150227170127, etc.
• The integer value is always set back to 1 when the instrument is set to off
To select data to view, delete or export, specify data filters
1. From the home screen, select Data log.
2. Select an option, then push Select.
Option Description
View data log Views measurement data. Select individual lines of data to view more
content.
Export data log Exports measurement data from the system to an external device. Preview
data selection before it is exported. Make sure that an external device is
connected to the instrument (e.g., a USB key, external hard drive, etc.).
Delete data log Removes measurement data from the system. Previews data selection
before it is removed.
3. Specify the data selection parameters. Push the left and right arrow keys to make a
selection. Push the up and down arrow keys to select an option.
Option
Result type
Application
Date
Operator
4. If View data log was the selected option, push View to see the selected data.
• Push the up and down arrow keys to select a line of data and push Detail to see
more data
• If Electrode calibration is selected as the Result type, push the left and right
arrow keys to select the sensor if more than one sensor is installed. Push the up
and down arrow keys to select a line of data, then push the left and right arrow
keys to see related graphs
• If only one Application is selected push the up and down arrow keys to select a
line of data and push Detail to see more data, or push the left and right arrow
keys to see related graphs
5. If Export data log or Delete data log was the selected option, push Preview to see
the selected data, then push Export or Delete to start the procedure.
Use this procedure to remove air bubbles from the system. Refer to
instrument for measurement
Description
Sets the type of result available.
Sets the available applications.
Sets the date range.
Sets the available operators.
on page 30 for instructions.
Standard operations
Prepare the
39