Resetting The Adsl Link - ADC 410F User Manual

Configuring ADSL Service
4 Configure the ADSL downstream and upstream parameters.
Ž
Enter the
If a non-32 kbps value is entered, the value is automatically rounded up to the
nearest 32 kbps value. This is the maximum data rate attainable by the modems, and
the data rate at which the modems sync will be equal to or less than this value as per
the
Startup Option
The downstream
increments. The default is
The upstream
increments. The default is

Enter the
modems, and the data rate at which the modems sync will be equal to or greater than
this value as per the
The downstream
increments. The default is
The upstream
increments. The default is

Select the
04 , 08 , and
Higher interleave values provide more noise immunity, but increase the delay
through the system.
5 Click
Submit
6 After you make changes to the ADSL configuration, effect the configuration completing
the procedures for

Resetting the ADSL Link

Selecting ADSL Menu, Reset Link brings down the ADSL link between the
Megabit Modem 410F and 420F.
54
Max Data Rate (kbps).
parameter.
Max Data Rate (kbps)
7552
Max Data Rate (kbps)
928
Min Data Rate (kbps) . This is the minimum data rate available for the
Startup Option
Min Data Rate (kbps)
64 .
Min Data Rate (kbps)
64 .
Interleave Option (msec)
16 msec. The default is
when you complete all the ADSL configuration settings.
"Resetting the ADSL Link"
The values entered should be in 32 kbps increments.
range is 64 kbps to
.
range is 64 kbps to
.
parameter.
range is 64 kbps to
range is 64 kbps to
. For downstream and upstream, the options are
04 .
on this page.
Megabit Modem 410F and 420F User Manual
7552 kbps, in 32 kbps
928 kbps, in 32 kbps
7552 kbps, in 32 kbps
928 kbps, in 32 kbps
02 ,