Saving the Configuration to NVRAM
After clicking
Submit
writing the parameters to NVRAM. See
and reset the modem to effect.
1
Click
System
2
Click
Update Configuration
3
Do one of the following:
•
Click
Proceed
•
Click
Cancel
4
Reset the modem to effect the configuration using the procedure on
Megabit Modem 410F and 420F User Manual
to write configuration parameters to RAM, update your configuration by
on the
to access the
Main Menu
on the
System Menu
to save to NVRAM.
. The configuration parameters are not written to NVRAM.
page 36
for a list of changes you must save to NVRAM
System Menu
.
Chapter 4: Setting Up for Configuration
.
page
38.
37