Table of Contents
Advertisement
2
Enter the bridging configuration parameters:
‹
Select
Bridging Enable
Click
Spanning Tree Enable
The Spanning Tree protocol eliminates loops in a bridged LAN topology. When
Spanning Tree is selected, it becomes active when bridging is enabled. If the
modem is configured for routing only, Spanning Tree does not run. See
"Spanning Tree Protocol" on page 69
3
Enter the routing configuration parameters:
Œ
Select
Routing Enable
on page 71
Click
Static Route Table
up to 32 static route entries. Go to
configure these parameters.
4
Enter the LAN and WAN port configuration parameters:
Enter the
default IP address for the LAN port is 192.168.0.1.
Enter the
routing is enabled and you must enter a valid IP address. When routing is not
enabled, the field is blank.
Ž
Enter the
LAN port. The default IP subnet mask is 255.255.255.0.
Enter the
is available only if routing is enabled and you must enter a valid subnet mask. When
routing is not enabled, the field is blank.
The
LAN Bridge Port Priority
mode and
higher priority when active simultaneously.
The
WAN Bridge Port Priority
Bridging
has higher priority when active simultaneously.
Megabit Modem 410F and 420F User Manual
to forward Ethernet data based on MAC addresses.
to enable the Spanning Tree protocol.
to forward IP datagrams based on IP addresses. See
for more information.
to get a dialog to set up static routes. The modem can accept
LAN IP Address
for the modem Ethernet 10/100BASE-T LAN port. The
WAN IP Address
for the ADSL (WAN) port. This option is available only if
LAN IP Net Mask
(subnet IP mask) for the modem Ethernet 10/100BASE-T
WAN IP Net Mask
(subnet IP mask) for the ADSL (WAN) port. This option
is preset to
Spanning Tree
are both enabled and determines which modem port has
is preset to
mode and
Spanning Tree
for more information.
"Defining Static Route Entries" on page 51
100
. Bridge Port Priority is used when
101
. Bridge Port Priority is used when
are both enabled and determines which modem port
Chapter 6: Configuring the Ports
"Routing"
to
Bridging
49
Advertisement
Table of Contents
Troubleshooting
