ADC 410F User Manual page 3

A U
BOUT THIS
Use this manual to install and configure the Megabit Modem 410F and 420F. This manual
provides instructions on:
•
information you will need to configure the modems
• unpacking and inspecting the modems for installation
•
installing the modems
• setting up parameters for your applications that will be used to configure the modems
•
configuring system parameters
• configuring the connection between the Megabit Modem 410F and 420F
• monitoring and troubleshooting the modems
Chapter 9 provides a reference for technology implemented in the Megabit Modem 410F and
420F. The chapter covers information about Asymmetric Digital Subscriber Line (ADSL), rate
adaptive transmission, the bridging/routing operating mode, and Simple Network Management
Protocol (SNMP) management.
IP addresses used in this manual are for example only. You will acquire your own addresses
from your information services coordinator to configure the Megabit Modem 410F and 420F.
You will, however, use the IP address specified in
page 34 to access the Megabit Modem 410F and 420F from a Web browser.
D C
OCUMENT
Two types of messages, identified by icons, appear in the text.
Notes contain information about special circumstances.
Cautions indicate the possibility of equipment damage or the possibility of
personal injury.
Megabit Modem 410F and 420F User Manual
M
SER ANUAL
ONVENTIONS
"Accessing the Modem Web Pages" on
About this User Manual
iii