Rtc Battery - HP ProBook x360 11 G5 Education Edition Maintenance And Service Manual

RTC battery

Table 5-7 RTC battery spare part information
Description
RTC battery (includes cable and double-sided adhesive)
Before removing the RTC battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the keyboard/top cover (see
5. Remove the battery (see
Remove the RTC battery:
1. Disconnect the RTC battery cable (1) from the system board.
2. Detach the RTC battery from the bottom cover (2). (The RTC battery is attached to the bottom cover with
double-sided adhesive.)
Reverse this procedure to install the RTC battery.
Keyboard/top cover on page
Battery on page 40).
Spare part number
L43797-001
29).
Component replacement procedures 45