5
Programming Command Reference
5-106
Power Control Level
TESTs:MANual:PLEVel CNTUP|CNTDWN|HOLD,<int>
This command sets the output level of the mobile phone with
Power Control (TPC) in the Stand-by status. The Power Control
is valid during the Connection status. The allowable range and
preset values are as follows:
Table 5-20 Power Control Level Parameter and Preset Value (for
Stand-by)
Parameter
Description
CNTUP
Increases output power level of the mobile phone
continuously.
CNTDOWN
Decreases output power level of the mobile
phone continuously.
HOLD
Remains output power level of the mobile phone.
<int>
Increases or decreases output power level of the
mobile phone by <int> dB. This setting is valid in
the Connection status.
1 to 99 dB in 1 steps.
TESTs:MANual:PLEVel <<
UP|DOWN|CNTUP|CNTDOWN|HOLD,<int>
This command sets the output level of the mobile phone with
Power Control (TPC) and can be used in Connection status. The
allowable range and preset values are as follows:
Table 5-21 Power Control Level Parameter and Preset Value (for
Connection)
Parameter
Description
UP
Increases output power level of the mobile phone
by <int> dB is described in the bottom row of this
table.
DOWN
Decreases output power level of the mobile
phone by the <int> dB is described in the bottom
row of this table.
CNTUP
Increases output power level of the mobile phone
continuously.
CNTDOWN
Decreases Power Control Level continuously.
HOLD
Remains Power Control Level.
N9360A Multi UE Tester CDMA2000 Programming Manual
Preset value
HOLD
1
Preset value
HOLD
HOLD
HOLD