Table of Contents
Advertisement
(4) Screen image is smaller or larger than the actual screen images.
Use the <Resolution> adjustment.
Adjustment is needed when the input signal resolution and the resolution now being displayed are
different.
Select <Resolution> and confirm if the resolution now being displayed is the same as the input
resolution. If it is not, adjust the vertical resolution using the up and down button and adjust the
horizontal resolution using the right and left buttons.
4. Adjust the output signal range (Dynamic Range) of the signal.
Use the
This controls the level of output signal range to display the whole color gradation (256 colors).
[Procedure]
Press the Auto Adjustment button on the Control panel while displaying the <Range Adjustment> message
to automatically adjust the range. The screen blanks for a moment and adjusts the color range to display the
whole color gradation of the current output signal.
4-2. Displaying Low Resolutions
The lower resolutions are enlarged to full screen automatically. Using the <Screen Size> function in the
<Others> menu enables to change the screen size.
1. Enlarge the screen size when displaying a low resolution.
Select the <Screen Size>.
<Range
Adjustment> of <Screen> menu.
Advertisement
Table of Contents
