Table of Contents
Advertisement
English
4-2. Displaying a low resolutions
The lower resolutions are enlarged to full screen automatically. Using the <Screen Size>
function in the <Others> menu enables to change the screen size.
1.
Enlarge the screen size when displaying a low resolution.
→
Select the <Screen Size> in the others menu and select the screen size by using the
up and down buttons.
Menu
Full
Enlarged
Normal
Example: Displaying1024 x 768
Full (Default Setting)
(1280×1024)
2.
Smooth the blurred texts of the enlarged screen.
→
Select the suitable level from 1 – 5 (Soft – Sharp).
Select <Smoothing> in the <Screen> menu and adjust by using the right and left
buttons.
NOTE
• <Smoothing> is disabled when the screen is displayed in the following
resolutions.
*1280 x 1024
*The image size is doubled both in horizontally and vertically to (i.e. 1280 x
960 enlarged from 640 x 480) provide clear focus which does not require this
function.
26
4. ADJUSTMENT
Select the <Screen Size>.
Displays the picture on the screen in full, irrespective of the picture's
resolution. Since the vertical resolution and the horizontal resolution
are enlarged at different rates, some images may appear distorted.
Displays the picture on the screen in full, irrespective of the picture's
resolution. Since the vertical resolution and horizontal resolution are
enlarged at same rates, some horizontal or vertical image may
disappear.
Displays the picture at the actual Screen resolution.
Enlarged
(1280×960)
Switch the <Smoothing> setting.
Function
Normal
(1024×768)
Advertisement
Table of Contents
