05 Dual Binnacle Mount Remote Control / Second Station - BRP Evinrude E-TEC G2 150 HP Installation & Predelivery Manual

Diagrams
Digital Remote Controls

05 Dual Binnacle Mount Remote Control / Second Station

Ref Description
1 START – STOP Switch, 2 Engine
2 Dual Binacle Mount Remote Control
3 *Remote Control Harness
4 Key Switch Switch Connection
5 START – STOP Switch Connection
6 Remote Control to NMEA 2000 Network Connection
7 Accessory Power Out (12 VDC)
8 Remote Control Network Connection
9 Network Power In (12 VDC)
10 Oil Level 1 & 2
11 Fuel Level 1 & 2
12 Trim Switch Connection
13 Terminator Kit
14 Connection to NMEA 2000 Digital Display
15 Connection to NMEA 2000 Network
16 NMEA 2000 Buss Cables
2 ft. (0.6 m)
6 ft. (1.8 m)
15 ft. (4.5 m)
25 ft. (7.6 m)
17 Backbone Buss Cables
15 ft. (4.5 m)
20 ft. (6.0 m)
25 ft. (7.6m)
18 Backbone Buss Cable Extensions
1 ft. (0.3 m)
2 ft. (0.6 m)
4 ft. (1.5 m)
10 ft. (3.0 m)
15 ft. (4.5 m)
20 ft. (6.0 m)
25 ft. (7.6 m)
19 Network Power Cable, 15 ft. (4.5 m)
19 Network Power Cable, 25 ft. (7.6 m)
NS Network Power Cable Extension, 5 ft. (1.5 m)
NS Network Power Cable Extension, 10 ft. (3.0 m)
20 Fuel Tank Sender
21 6–Port Hub
22 Connection to NMEA 2000 Accessories
23 Battery Cable, 10 ft. (3.0 m)
23 Battery Cable, 15 ft. (4.5 m)
23 Battery Cable, 20 ft. (6.0 m)
24 NMEA 2000 Network to Engines
25 Remote Control Network to Engines
* "Y" Harness (Optional accessory)
IMPORTANT: Two station installations REQUIRE two 6-port hubs. The backbone buss cable MUST be connected as
shown.
122
P/N Notes
766558
766564
– Included with Remote Control
–
–
–
–
–
–
–
–
–
764155
–
–
–
765132
764161
764162
764163
–
587173
587174
587175
–
587176
587177
587178
587179
587180
587181
587182
587184 10 Amp fuse
587183 10 Amp fuse
587185
587186
–
587172 See IMPORTANT note below
– GPS, Triducer, etc.
587205
587301
587302
–
–
Use to power digital displays & accessories to be
587230
powered when the key switch is ON.