Relevant Models; Objectives Of This Document - Kenwood TS-590S Setting Manual

1. Relevant Models

This operations guide is for the TS-590S.
Using the TS-590S and KENWOOD NETWORK COMMAND SYSTEM (hereinafter called
"KNS") enables transceiver operations by remote control using a home LAN or the
internet.
KNS is a system configured using PCs, network environments, ARCP-590 (a Radio
Control Program) (hereinafter called "ARCP-590"), ARHP-590 (a Radio Host Program)
(hereinafter called "ARHP-590"), and ARVP-10 (a VoIP Program) (hereinafter called
"ARVP-10") for remote control of the TS-590S.
Important

To configure the system, knowledge not only of transceivers but also of PCs and
networks is required. JVC KENWOOD does not offer support for customer PCs
and Networks. Furthermore, for operations relating to actual transmitting, note that
procedures according to the Radio Act are also required.

Operations via networks may be delayed due to unavoidable principles.
Consequently, do not perform operations (such as contests or pile-ups requiring
quick responses) for which delays are likely to be a problem.

Refer to "5. Limitations

JVC KENWOOD Corporation shall bear no responsibility for related damage such
as damage caused by missed communications and dialog opportunities due to
incorrect customer settings, nonconformances, or misoperations as a result of
using this document or the ARCP-590, ARHP-590 or ARVP-10 software.

2. Objectives of this document

To supply information to configure a remote control system via a home LAN or internet
using the TS-590S, ARCP-590, ARHP-590 and ARVP-10.
The following describes the main elements.
Programs used
Network
IP address used
Application based
on the Radio Act
Caution!" for other limitations.
Via Internet
ARCP-590 (Operates
transceiver remotely.)
ARHP-590 (Exists between the
ARCP-590 and transceiver, and
control it.)
ARVP-10(Transmits and
receives audio)
Connection via the internet
(To use the internet, a contract
with a provider is necessary.)
Global IP address
Application using the internet
2
Home LAN
ARCP-590 (Operates
transceiver remotely.)
ARHP-590 (Exists between the
ARCP-590 and transceiver, and
control it.)
ARVP-10 (Transmits and
receives audio)
Connection using the home
LAN
Local IP address
Application using the home
LAN