SATO CL4NX Plus Operator's Manual page 497

• When excluding first barcode(s) from the check target by setting [Start Position],
specify the number of barcodes without the excluded barcodes.
[Start Position]
Adjust the position at which the barcode check starts (position of the barcode checker at which reading
starts).
The barcode checker starts reading each media after the specified length passes from the printing
start position.
This setting can be used to exclude first barcode(s) from the check target when multiple barcodes are
printed on each media.
The setting range varies depending on the print resolution of the product.
The setting range is as follows:
Resolution
203 dpi
(1 dot = 0.125 mm (0.0049"))
305 dpi
(1 dot = 0.083 mm (0.0033"))
609 dpi
(1 dot = 0.042 mm (0.0017"))
CL4NX Plus
10 to 20000 dots
15 to 18000 dots
30 to 9600 dots
497