Table of Contents
Advertisement
• Never exceed the maximum operating pressure for the tool. It is
recommended that air pressure to this tool does not exceed 6.2 bar
(90 psi) at the tool when running. Higher pressures and unclean air
will shorten the life of the tool due to faster wear and is a possible
safety hazard.
PRODUCT OVERVIEW
NO DESCRIPTION
1
Sanding Pad
2
Drive Locking Tool
3
Safety Trigger
4
Female air inlet
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
NO DESCRIPTION
5
Air Exhaust Outlet/deflector
6
Speed Adjuster
7
Grease Nipple
6
Advertisement
Table of Contents
