Table of Contents
Advertisement
3. Failing this, it may be necessary to replace worn or damaged parts. You
may prefer to take the tool to your Clarke dealer if internal maintenance is
required.
STORAGE
If the tool is to be stored or is idle for longer than 24 hours, run a few drops of
Clarke air-line oil into the air inlet and depress the trigger in order to lubricate
the internal parts.
When not in use, the tool should be disconnected from the air supply and
stored in a dry place out of the reach of children. Avoid storing in a damp
environment.
ABRASIVE DISCS
Replacement hook and eye backed abrasive discs (2" (50mm) dia) are
available from your CLARKE dealer:
CAT173 60 grit
CAT174 120 grit
CAT175 180 grit
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission.
This guarantee does not effect your statutory rights.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
Part No 3120190
Part No 3120191
Part No 3120192
11
Advertisement
Table of Contents
