Check And Clean The Hydraulic Units - Toro Z Master Commercial 3000 Series Operator's Manual

Figure 69
1. Engine guard
2. Engine air-intake screen
3. Bolt
g004218
4. Fan housing
5. Screw
Check and Clean the
Hydraulic Units
Service Interval: Before each use or daily
1. Disengage the PTO and set the parking brake.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Move the seat forward.
4. Clean the debris and grass from the hydraulic
units (Figure 70).
5. Position the seat.
1. Hydraulic units
49
Figure 70
g009922
g015117