Toro Z Master Commercial 3000 Series Operator's Manual page 23

CAUTION
Machine can spin very rapidly. You may lose
control of machine and injure yourself or
damage the machine.
• Use caution when making turns.
• Slow the machine down before making
sharp turns.
Using the Motion-Control Levers
Figure 19
1. Motion-control
lever— -
NEUTRAL LOCK
position
2. Center, unlocked position
3. Forward
Driving Forward
Note:
The engine shuts off when you move the
traction control levers with the parking brake engaged.
To stop the machine , pull the motion-control levers
to the position.
NEUTRAL
1. Release the parking brake; refer to
the Parking Brake (page
2. Move the levers to the center, unlocked position.
3. To drive the machine forward, slowly push the
motion-control levers forward
g004532
4. Backward
5. Front of machine
Releasing
20).
(Figure 20).
Driving Backward
1. Move the levers to the center, unlocked position.
2. To go backward, slowly pull the motion-control
levers rearward
23
Figure 20
(Figure 21).
Figure 21
g008952
g008953