Attaching Network Data Protection Unit Type B - Ricoh Aficio CL4000DN Setup Manual

Attaching Network Data Protection Unit Type B

Important
❒ Protect the network data protec-
tion unit from physical shocks.
Note
❒ Use the centre slot for the data pro-
tection unit.
A
Check the package contains the
following:
❖ Network Data Protection Unit
B
Turn off the power, and then un-
plug the power cable.
C
Remove the cover the controller
board's central expansion card
slot.
Attaching Network Data Protection Unit Type B
D
Carefully insert the network data
protection unit, until the card
clicks into the place.
E
Reattach the cover over the net-
work data protection unit. Fasten
the screw to secure the cover.
AET104S
Note
❒ Do not touch the network data
protection unit while the ma-
chine is in use. It may come
loose, even if pushed only
slightly.
AET105S
3
AET106S
AET107S
57