Report - TEC FS-3600 Owner's Manual

X Report
5.15 X Report
System
The X Report allows a user to print a pre-defined sequence of
reports with a single command, without clearing any totals.
The option to include each report is set in the Function Setup table.
The pages/options for each report are shown on page 5-33
Set the System X option for a report to print it with a System X
function.
•
Reports set for the System X are also included with a
Revenue Center and Station X reports.
Set the User X option for a report to print it with a User X
function.
5-30
Revenue
Center Station
Chapter 5 - Reports
User
FS-3600 Owner's Manual