TEC FS-3600 Owner's Manual page 23

Chapter 1 - FS-3600 Overview
Key Function
Exec Batch 1 - 4
Exit
Finished Prod
Waste
#1 - #5
Foreign Currency
Function NLU
(Number Look Up)
Guests
Inventory Report
Inventory Rpt NLU
(Number Look Up)
Labor Report
FS-3600 Owner's Manual
POS Function Description
This function enables calling a DOS batch file
outside of the POS application then restoring
the POS application.
Each key assigned 1 thru 4 corresponds with a
file c:\NCCPOS\Proc1.bat. thru Proc4.bat
More details of setting up this function are
available by request.
DOS batch file programming knowledge is
required and is not supported as part of the
FS-3600/2700 programming.
Applies to the FS-2700.
This key type is used at the beginning of a
transaction to identify it as a waste ticket.
All items entered in the transaction will update
the waste totals.
This key type is used to calculate the amount
due on the check in a foreign currency.
Designed primarily for the FS-2700.
Can be used for functions that are not preset
on the keyboards. Index the code for the
function then press {FUNCTION~NLU}.
See FS-3600/2700 Programming Manual for a
list of operations that can be done with this key
and codes used with each one.
This key type is used to enter or change the
number of guests on a check.
Assign one of the Inventory Reports to a key.
Designed primarily for the FS-2700.
Used to print Inventory Reports from the
keyboard.
Index the function number of the report then
press {INV.~REPORT~NLU}.
Used to assign one of the Labor Reports to a
key.
POS Key Functions - Summary
1-15