Servicing The Bidet Wand - Kohler K-3900X Homeowner's Manual

Integrated toilet

Hide thumbs Also See for K-3900X:

Table of Contents

Available languages

Servicing the Bidet Wand

Servicing the Bidet Wand Spray Tip

NOTE: The bidet wand spray tip can become clogged with mineral deposits from the water. It should be cleaned

periodically. The amount of times between each cleaning will depend upon water quality. If performance is poor,

the spray tip should be cleaned.

Select [settings].

Select [cleaning].

Select [manual clean].

Select [extend wand]. The bidet wand will extend.

Manually clean the bidet wand.

Remove the bidet wand spray tip by inserting a small thin object into the hole on the underside of the wand

pushing the spray tip up.

Inspect the spray tip. If there is mineral buildup in the spray tip, remove the minerals by soaking it a cleaning

solution until the minerals are gone.

Remove any mineral deposits from the spray tip opening in the bidet wand.

Replace the spray tip if needed.

Reinstall the spray tip once it is clean or install a new spray tip. Make sure the tip is flush with the surrounding

surfaces on the wand. If the spray tip is not flush, it may be damaged or stick as the wand retracts.

Select [close] when the cleaning is complete.

Select [home] to return to the main screen or [back] to return to the previous screen.

Kohler Co.

Tip

Bidet

Wand

Bidet

Light

1153043-X5-C

Table of Contents