Table of Contents
Advertisement
10.2.5.2
Installing expansion modules
PCI card
Steps for installing a PCI card:
1 Open the device
2 Remove the relevant steel slot cover (1)
3 Insert the expansion module (2) into the
relevant slot.
4 Secure the frame with the (2,3) card
retainers.
•
•
•
5 Carefully insert the card retainer from
the outside (3) until the notch (2)
securely grips the card.
6 Saw off the projecting end (3).
Otherwise you cannot close the device.
7 Close the device.
Panel PC IL 77
Operating Instructions, Edition 10/2004, A5E00339979-01
Make sure that the frame is
connected to the device from the
outside.
To adapt to different cards, the
frame can be offset horizontally and
secured by 2 of the 4 threaded holes
(1).
Screw on the frame from the outside
using the suitable threaded holes
(1).
Maintenance and servicing
10.2 Installing and removing hardware components
10-9
Advertisement
Table of Contents
