Table of Contents
Advertisement
14.4
BIOS Setup
14.4
14.4.1
Overview
BIOS SETUPprogram
The BIOS SETUP program is stored in the ROM BIOS. Information about the system
configuration is stored in the battery-backed RAM of the device.
You can use SETUP to set the hardware configuration (for example, the hard disk type) and
define the system properties. You can also use SETUP to set the time-of-day and date.
Changing the device configuration
Your Rack PC device configuration is preset for working with the software supplied with the
unit. You should only change the preset values if you have modified your Rack PC in any
way, or if a fault occurs when the unit is powered up.
14.4.2
Starting BIOS Setup
Starting BIOS Setup
Start the setup program as follows:
Reset the device (warm or cold restart).
In the figures shown, the default settings differ based on the device versions. With the
default settings on the Box PC, for example, the following screen appears after booting:
Phoenix cME FirstBIOS Desktop Pro
Copyright 1985-2004 Phoenix Technoligies Ltd.
Copyright 2003-2004 Fujitsu Siemens Computers
Version 5.00 R2.XX.1562.01(XX je nach Version)
Intel Pentium 4 X.XX GHz (X.XX je nach Prozessor) 640K System RAM Passed
2. On completion of the POST, the BIOS gives you the opportunity of starting the SETUP
program. The following message appears on the screen:
<F2> BIOS Setup / <F12> Boot Menu
3. Press the F2 key as long as the BIOS prompt appears on the screen.
Panel PC IL 77
Operating Instructions, Edition 10/2004, A5E00339979-01
Detailed descriptions
14.4 BIOS Setup
14-3
Advertisement
Table of Contents
