Traction Control System - Lexus RX300 Manual

Hide thumbs Also See for RX300:
Table of Contents

Advertisement

TRACTION CONTROL SYSTEM

(Two–wheel drive models only)
The traction control system automatically helps control the
spinning of the front wheels which may occur when accelerating
on slippery road surfaces, thus assisting driver to control the
driving power of the front wheels.
31R015a
When you turn the ignition switch on, this system always turns
on. Leave the system on during ordinary driving so that it can
operate when needed. When traction control is applied, the slip
indicator light blinks.
STARTING AND DRIVING
31R016b
You can turn off the traction control system by pushing the
"TRAC OFF" switch. The "TRAC OFF" indicator/warning
light will then come on. Pushing the "TRAC OFF" switch a
second time turns the system back on and extinguishes the
"TRAC OFF" indicator/warning light.
You may hear a slight clicking noise in the engine compartment
when the engine is started or just after the vehicle is started. This
means that the traction control system is in the self–check mode, and
does not indicate malfunction.
When the traction control system is operating, you may feel
vibration or noise of your vehicle, caused by operation of the brakes.
This indicates the system is functioning properly.
When getting the vehicle out of mud or new snow, etc. the traction
control system will help operate to prevent the wheels from
spinning.
181

Advertisement

Table of Contents
loading

Table of Contents