Lexus RX300 Manual page 112

16R026b
" 1 Side airbag module (airbag and inflator)
2 Front passenger airbag module (airbag and inflator)
3 Seat belt pretensioner
4 Side airbag sensor assembly
5 Airbag sensor assembly
6 Driver airbag module (airbag and inflator)
7 SRS warning light
8 Front airbag sensor
The SRS airbag sensor assemblies consist of a safing sensor and
driver and front passenger airbag sensor.
In a severe frontal impact, the driver and front passenger airbag
sensor detects deceleration and the system triggers the front airbag
inflators and seat belt pretensioners. In a severe side impact, the side
airbag sensor triggers the side airbag inflator. Then a chemical
reaction in the inflators momentarily fills the airbags with non–toxic
gas to help restrain the forward or lateral motion of the occupants.
Then the inflators fill the airbags and the seat belts are quickly drawn
back in by the retractors to help restrain forward motion of the
occupants.
COMFORT ADJUSTMENT
When the SRS operates, it produces a fairly loud noise and release
some smoke along with non–toxic gas. This does not indicate a fire.
Be sure to wash off any residue as soon as possible to prevent minor
skin irritation.
Deployment of the airbags happen in a fraction of a second, so the
airbags must inflate with considerable force. While the system is
designed to reduce serious injuries, it may also cause minor burns or
abrasions and swellings.
Parts of the airbag module (steering wheel hub, dashboard, front
seats) may be hot for several minutes, but the airbags themselves
will not be hot. The airbags are designed to inflate only once.
A crash severe enough to inflate the driver and front passenger
airbags may break the windshield as the vehicle buckles. In vehicles
with a front passenger airbag, the windshield may also be damaged
by absorbing some of the force of the inflating airbag.
97