Wire And Hose Routing - BRP Johnson 4HP Service Manual

WIRE / HOSE ROUTING

WIRE AND HOSE ROUTING

WIRE AND HOSE ROUTING
•
Do not over-bend (kink) or twist hoses when installing.
•
When installing hose clips, position tube to avoid contact with other parts.
•
Check that hoses do not contact rods and levers during either engine operation or standstill.
•
Extreme care should be taken not to cut, abrade or cause any other damage on hoses.
•
Care should be taken not to cause hoses to be compressed excessively by any clamp when fit-
ted.
9-2