Toshiba Multifunctional Digital System GA-1190 Network Administration Manual page 41

Network printer kit
Hide thumbs Also See for Multifunctional Digital System GA-1190:
Table of Contents

Advertisement

22
Specify the "NDPS Printer Name" option, select "Create a New
Printer Agent", and click [Create].
The Create Printer Agent dialog box appears.
When setting up the NDPS in the iPrint mode, do not enter more than 7 characters for the
"NDPS Printer Name" option. If you enter more than 7 characters for the "NDPS Printer
Name" option, the default watermarks will not be registered when installing the printer
drivers in Windows 98/Me.
23
Specify the "Printer Agent (PA) Name" and "NDPS Manager Name"
option. Then select "Novell Printer Gateway" in the "Gateway
Types" list and click [OK].
The Warning dialog box appears.
24
Click [OK] to load the NDPS Manager to the server.
When it finishes initializing, the Information dialog box appears.
25
Click [OK].
The Configure Novell PDS for Printer Agent dialog box appears.
26
Select "((NONE))" in the "Printer Type" list and select "Novell Port
Handler" in the "Port Handler Type" list. Then click [OK].
The Configure Port Handler for Printer Agent dialog box appears.
27
Continue the procedure according to which connection type to be
used.
P.39 "Configuring the LPR connection in the TCP/IP network"
P.40 "Configuring the queue based connection in the IPX/SPX network"
Configuring the LPR connection in the TCP/IP network
1
In the Configure Port Handler for Printer Agent dialog box, select
"Novell LPR Printer Gateway (SNMP)" or "Remote (LPR on IP)" and
click [Next].
2
Enter the IP address of this equipment in the "Host Address" field,
and click [Finish].
It takes about 60 seconds to load the Printer Agent. After it finishes loading the Printer
Agent, the Select Printer Drivers dialog box appears.
3
Select the printer drivers to be installed in the "Printer Drivers" list
at each OS tab, and click [Continue].
The Information dialog box appears.
4
Click [OK].
It takes about 60 seconds to complete the creation of the NDPS Printer object.
5
Double-click the NDPS Printer object that you created.
The NDPS Printer dialog box appears.
6
Click [NDPS Remote Printer Management].
Setting up NetWare Print Server
39

Advertisement

Table of Contents
loading

Table of Contents