Toshiba Multifunctional Digital System GA-1190 Network Administration Manual page 36

2 SETTING UP NETWORK SERVER
Setting up the client computers
Each client computer of a Windows print server is already using a network protocol to communi-
cate with the server. Each client computer can print to this equipment if the printer has been
shared by a Windows print server. In that case the client computer does not have to use the
same network protocol to connect to the Windows print server as the server uses to communi-
cate with the equipment.
To set up printing on client computers, connect to the print server and select the shared printer.
Right-click the printer and select [Open]. When prompted, click [Yes] to have Windows set up
the printer.
After client computers have selected the printer, they can choose it from the Print Setup, Page
Setup, or Print dialog box of their application. Client computers can change printing options for
their own job, but printer properties are grayed and not available for changing. When a client
computer prints a document, the job is transmitted to the Windows print server, and from there to
this equipment.
The job is listed in the Print Manager on the client computer, and the administrator can track it in
the Print Manager on the Windows print server.
34 Setting up Windows Print Server