Toshiba Multifunctional Digital System GA-1190 Network Administration Manual page 17

4
Install the Client Software for Raw TCP or LPR printing.
Printing Guide
2 INSTALLING CLIENT SOFTWARE
Installing Client Software for Windows
Installing client software for Raw TCP/LPR printing
Setup flow for IPP printing (Windows)
Setting up the IPP
printer connection
This equipment can be used with the IPP printer connection for Windows Me, Windows 2000,
Windows XP, Windows Server 2003, and Windows Vista in a TCP/IP network. Even though IPP
printing can be used in a local area network, this method is commonly used to print over the
Internet. If you allow IPP printing through the Internet, you must configure the DNS server to
enable users to access this equipment over the Internet using the HTTP protocol. This is useful
when users want to print to this equipment from outside the local area network.
Only when the IPP client "wpnpins.exe" provided by Microsoft Corporation has already been
installed, can you use the IPP printing system in Windows 98 after installing a driver by following
the same procedure as that of Windows Me.
Setup procedure
1
Set up the TCP/IP and the HTTP Network Service to enable TopAc-
cess.
You should set the TCP/IP and HTTP Network Service from the control panel the first
time you use it, to make TopAccess available.
Setup Guide for Printing Functions
5 CONFIGURING NETWORKS (EQUIPMENT)
TCP/IP Configuration
HTTP Configuration
10 TopAccess ADMINISTRATION TAB PAGE - SETUP MENU (Printing Function)
Setting up Network Settings (Printing Function)
Setting up the TCP/IP
Setting up the HTTP network service
Connecting over Internet
Windows Me
Windows 2000
Windows XP
Windows Server 2003
Windows Vista
Setup Flow for Printing Features 15