Sfp+ Transceiver; Sfp993-1 - Siemens SIMATIC SFP Series Operating Instructions Manual

Properties
Transmitter output (optical)
Receiver input
* Depending on the cable used, you can find additional information in the "Industrial Ethernet /
)
PROFINET Passive network components" System Manual, see also section "Introduction", paragraph
"Additional documentation".
7.3

SFP+ transceiver

LC connector technology
The attachment to Industrial Ethernet uses LC connector
technology (Lucent Connector).
7.3.1

SFP993-1

Properties
Transmission mode
Transmission rate
Transmission medium
Light source
Wavelength
Cable length (max.) *
Transmitter output (optical)
Receiver input
* Depending on the cable used, you can find additional information in the "Industrial Ethernet /
)
PROFINET Passive network components" System Manual, see also section "Introduction", paragraph
"Additional documentation".
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 12/2017, A5E02630804-11
Minimum
Maximum
Sensitivity min.
Input power max.
10GBASE-SR complying with IEEE 802.3
10 Gbps (10 Gigabit Ethernet)
Multimode fiber-optic cable
Class1-LASER "Eye safe"
850 nm
OM3 fiber
)
OM4 fiber
Minimum
Maximum
Sensitivity min.
Input power max.
Technical data
7.3 SFP+ transceiver
-10 dBm
-4 dBm
-17 dBm
-3 dBm
Pluggable transceiver slot/
plugged in transceiver
300 m
550 m
-5 dBm
-1 dBm
-11 dBm
-1 dBm
31