Sfp992-1Lh; Sfp992-1Elh - Siemens SIMATIC SFP Series Operating Instructions Manual

Properties
Receiver input
* Depending on the cable used, you can find additional information in the "Industrial Ethernet /
)
PROFINET Passive network components" System Manual, see also section "Introduction", paragraph
"Additional documentation".
7.1.9

SFP992-1LH+

Properties
Transmission mode
Transmission rate
Transmission medium
Light source
Wavelength
Cable length (max.) *
Transmitter output (optical)
Receiver input
* Depending on the cable used, you can find additional information in the "Industrial Ethernet /
)
PROFINET Passive network components" System Manual, see also section "Introduction", paragraph
"Additional documentation".
7.1.10

SFP992-1ELH

Properties
Transmission mode
Transmission rate
Transmission medium
Light source
Wavelength
Cable length (max.) *
Transmitter output (optical)
Receiver input
* Depending on the cable used, you can find additional information in the "Industrial Ethernet /
)
PROFINET Passive network components" System Manual, see also section "Introduction", paragraph
"Additional documentation".
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 12/2017, A5E02630804-11
Sensitivity min.
Input power max.
1000Base-ZX complying with IEEE 802.3
1000 Mbps (Gigabit Ethernet)
Single mode fiber-optic cable
Class1-LASER "Eye safe"
1550 nm
70 km
)
Minimum
Maximum
Sensitivity min.
Input power max.
1000Base-ZX
1000 Mbps (Gigabit Ethernet)
Single mode fiber-optic cable
Class1-LASER "Eye safe"
1550 nm
120 km
)
Minimum
Maximum
Sensitivity min.
Input power max.
Technical data
7.1 SFP transceiver
-23 dBm
-3 dBm
0 dBm
5 dBm
-23 dBm
-3 dBm
0 dBm
5 dBm
-32 dBm
-8 dBm
29