Sfp992-1 - Siemens SIMATIC SFP Series Operating Instructions Manual

Properties
Transmission medium
Light source
Wavelength
Cable length (max.) *
Transmitter output (optical)
Receiver input
* Depending on the cable used, you can find additional information in the "Industrial Ethernet /
)
PROFINET Passive network components" System Manual, see also section "Introduction", paragraph
"Additional documentation".
7.1.5

SFP992-1

Properties
Transmission mode
Transmission rate
Transmission medium
Light source
Wavelength
Cable length (max.) *
Transmitter output (optical)
Receiver input
* Depending on the cable used, you can find additional information in the "Industrial Ethernet /
)
PROFINET Passive network components" System Manual, see also section "Introduction", paragraph
"Additional documentation".
7.1.6 SFP992-1+
Properties
Transmission mode
Transmission rate
Transmission medium
Light source
Wavelength
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 12/2017, A5E02630804-11
Single mode fiber-optic cable
Class1-LASER "Eye safe"
1550 nm
200 km
)
Minimum
Maximum
Sensitivity min.
Input power max.
1000Base-SX complying with IEEE 802.3
1000 Mbps (Gigabit Ethernet)
Multimode fiber-optic cable
Class1-LASER "Eye safe"
850 nm
At 50 µm fiber core diameter
)
At 62.5 µm fiber core diameter
Minimum
Maximum
Sensitivity min.
Input power max.
1000Base-LX
1000 Mbps (Gigabit Ethernet)
Multimode fiber-optic cable
Class1-LASER "Eye safe"
1310 nm
Technical data
7.1 SFP transceiver
1 dBm
5 dBm
-42 dBm
-9 dBm
750 m
350 m
-9.5 dBm
-4 dBm
-17 dBm
-3 dBm
27