Sfp992-1Ld/Sfp992-1Ld(C); Sfp992-1Lh - Siemens SIMATIC SFP Series Operating Instructions Manual

Technical data
7.1 SFP transceiver
Properties
Cable length (max.) *
Transmitter output (optical)
Receiver input
* Depending on the cable used, you can find additional information in the "Industrial Ethernet /
)
PROFINET Passive network components" System Manual, see also section "Introduction", paragraph
"Additional documentation".
7.1.7

SFP992-1LD/SFP992-1LD(C)

Properties
Transmission mode
Transmission rate
Transmission medium
Light source
Wavelength
Cable length (max.) *
Transmitter output (optical)
Receiver input
* Depending on the cable used, you can find additional information in the "Industrial Ethernet /
)
PROFINET Passive network components" System Manual, see also section "Introduction", paragraph
"Additional documentation".
7.1.8

SFP992-1LH

Properties
Transmission mode
Transmission rate
Transmission medium
Light source
Wavelength
Cable length (max.) *
Transmitter output (optical)
28
At 50 µm fiber core diameter
)
At 62.5 µm fiber core diameter
Minimum
Maximum
Sensitivity min.
Input power max.
1000Base-LX complying with IEEE 802.3
1000 Mbps (Gigabit Ethernet)
Single mode fiber-optic cable
Class1-LASER "Eye safe"
1310 nm
10 km
)
Minimum
Maximum
Sensitivity min.
Input power max.
1000Base-EX complying with IEEE 802.3
1000 Mbps (Gigabit Ethernet)
Single mode fiber-optic cable
Class1-LASER "Eye safe"
1550 nm
40 km
)
Minimum
Maximum
2 km
1 km
-15 dBm
-1 dBm
-23 dBm
-3 dBm
-9.5 dBm
-3 dBm
-21 dBm
-3 dBm
-6 dBm
0 dBm
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 12/2017, A5E02630804-11