Precautions For Use - Toshiba IK-WB11A Basic User's Manual

Toshiba network camera user's guide
Hide thumbs Also See for IK-WB11A:
Table of Contents

Advertisement

Precautions for Use

About the SD Memory Card(IK-WB11A only)
● There is a limit to the number of rewrites that is possible with the SD memory
card. Replacing of the SD memory card when performing periodic
maintenance of the camera is recommended.
● The camera supports the following SD memory cards. Do not use memory
cards with other specifications.
SD memory card:
Physical interface:
● Images may not be recorded or read correctly if an unsupported SD memory
card is used with the camera.
● Carefully read the User's guide, precautions on use, and any other information
supplied with a purchased memory card.
● An SD memory card can be used for the loop recording of images. The life-
span (number of rewrites possible) of an SD memory card is greatly affected
by the capacity of the SD memory card. The use of a 128, 256, or 512 MB
large-capacity SD memory card is recommended for loop recording.
● To achieve maximum performance of the camera, the use of a Toshiba SD
memory card is recommended. If a card of another company is used, the
recording intervals may lengthen and the erasure time during overwriting
may increase. As a result, the number of delivered frames of live video may
decrease.
● Do not use a memory card containing the data recorded by another device
with the camera as this may result in the camera not functioning correctly.
● Do not modify, overwrite the data, or change the folder name of an SD
memory card. It may result in the camera not to function correctly.
● Data recorded with the camera do not comply with the image file format Exif
and the DCF standard. If the SD memory card is to be removed to play
images, use a personal computer to play the images. Other devices may
not be capable of displaying the images.
Caution for wireless mode
● During wireless mode operation, try to leave minimum of 20cm (8 inches)
spacing between people and the equipment.
8, 16, 32, 64, 128, 256, and 512 MB SD memory
cards (3.3 V) supported.
Part 1. Physical Layer Specification; Version 1.01
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ik-wb01a

Table of Contents