6.6 QUENCHING LAMP REMOVAL
1. Remove the exterior covers and the exposure glass. (See Exterior
Cover/Exposure Glass Removal.)
2. Open the upper unit.
3. Remove the harness clamper [A] (1 screw).
4. Disconnect the connector (CN119) [B] from the main board.
5. Remove the quenching lamp [C] (2 screws).
NOTE: When reinstalling, make sure that the quenching lamp is secured
firmly by the hook [D].
SM
[B]
[D]
[C]
6-29
OTHERS
[A]
A184R534.wmf
A183/A184