Full Image - Toshiba E-STUDIO 210C Operator's Manual For Copying Functions

5. FULL IMAGE

When the image occupies the entire original (to the edges), use Full Image Copying to reduce the ratio
1
a little bit so that the edges of the image will not be missed.
2
3
4
1
Place paper in the cassette(s).
- When using this mode in bypass copying (
5
sure to specify the paper size.
2 Place the original(s).
6
3
Press the EDIT key to enter the editing menu, and
press the FULL IMAGE key.
- The image is automatically reduced by a few percent so that
7
the entire image can be copied on a sheet.
8
Select other copy modes as required.
9
4
Press the
10
11
12
5-8
USING THE EDITING FUNCTIONS
Page 2-9
START key.
Page 2-4
Page 6-5), be