5. FULL IMAGE COPYING
When the image occupies the entire original (to the edge), this function reduces the ratio a
little bit so that the edges of the image will not be missed.
Copying Procedure
1
Place the original(s) on the original feed
tray or on the glass.
● See page 22 for how to set the original.
2
Press the EDIT key to enter the Edit menu.
3
Press the FULL IMAGE key.
● The image is automatically reduced by a few
percent so that the entire image is copied on
a sheet.
4
Return to the Basic menu, then set the
desired copy size, image density level, copy
quantity, etc. if necessary.
5
Press the START key.
70
Original
Full Image Copying