User Selection (Initial Settings) - Toshiba E-STUDIO 210C Operator's Manual For Copying Functions

6. USER SELECTION (INITIAL SETTINGS)

You can change the initial setting (default setting) of each mode displayed on the User Selection
1
screen.
The following modes can be changed.
• Energy saving level
• Original image type
2
1 Press the PROGRAM key to enter the programme
3
menu, and press the USER SELECTION key.
- If the key for the desired function is not shown, press the
Pre or the Next key to switch the screen.
4
5
2
Press the icons of the settings you desire (selected
settings will be shaded), then press the SET key.
6
- The keys in the shaded pattern on the screens shown on the
right are initial settings (default settings).
7
8
The original (image type) mode can be set for the colour origi-
nals and black-and-white originals, respectively.
9
* The Advanced Image mode might be optional depending on
shipping places.
10
11
12
6-16
USING THE SPECIAL FUNCTIONS
• Colour mode
• Bypass feeding
• Copy density (Exposure) mode
• Calibration