Table of Contents
Advertisement
2. SIMPLE TROUBLESHOOTING
Check the following items, and if the problem still occurs, call service for assistance.
1
Items to be checked
2
Is the power cord plug firmly in-
serted in the outlet?
Are the front covers(left and
3
right), the exit cover and the
large-capacity feeder (optional)
firmly closed?
4
Is the bypass guide firmly
closed?
5
Display does not change when keys or icons are pressed
6
Is the copier in the energy saving
mode (Automatic Energy Saving
mode)?
7
Is the access code keyed in? Is
the access code correct?
8
Is a key copy counter (optional)
used?
Is the "Warming up" message
9
displayed?
Does the administrator password
input screen appear?
10
Is interrupt copying set?
11
12
10-4
MAINTENANCE
Copier does not start
Insert the power cord plug firmly.
Close the covers properly.
Close the bypass guide unit properly.
Press the
key on the control panel to clear the mode. (It
takes a while for the copier to become ready.)
Key in the correct access code.
* If the access code is not clear, ask your copier
manager.
If you are using a key copy counter, insert it
into the slot.
Wait until the copier becomes ready.
The administrator password is required. Ask
your copier manager.
Press the
panel to clear the mode.
Countermeasure
ENERGY SAVER or
INTERRUPT key on the control
Reference page
Page 1-2, 9-4
Page 9-13
START
Page 1-4, 6-31
Page 1-9
Page 1-10
Page 1-8
Page 6-22
Page 2-17
Advertisement
Table of Contents
