Image Repeat - Toshiba E-STUDIO 210C Operator's Manual For Copying Functions

11. IMAGE REPEAT

1 You can repeat the entire original or a part of the area of the original on the copy.
* Image repeat is only possible with standard sized originals. However, a non-standard sized original can
be copied if it is placed on a standard sized original and its area is specified.
2
3
Non-standard size
4
5
1 Place paper in the cassette(s).
- When using this mode in bypass copying (
sure to specify the paper size.
6
2 Press the EDIT key to enter the editing menu, and
press the IMAGE REPEAT key.
- If the key for the desired function is not shown, press the
Next key to switch the screen.
7
8
3
Place an original on the glass to specify the area.
9 - Set the original face up with the bottom toward you, fit its
top left corner against the top left corner of the glass, and
align it with the original scale.
4
Using the original scale on the left and the inner (top)
10
scale, read the position of the desired area, as fol-
lows:
- X1 Distance from the top left to the left edge of the specified
11 area.
- X2 Distance from the top left to the right edge of the speci-
fied area.
- Y1 Distance from the top left to the upper edge of the speci-
fied area.
12
- Y2 Distance from the top left to the lower edge of the speci-
fied area.
5-20
USING THE EDITING FUNCTIONS
Standard size
Page 2-4
Page 6-5), be