5. CLEAR PAPER
1
If the CLEAR PAPER
right, be sure to carry out step 6. If this action is not sufficient,
the paper may be torn or be left in the copier.
2
3
7
Turn the knob in the direction of the arrow (clock-
wise) and pull out the transfer belt unit.
4
5
6
8
Remove any misfed paper on the transfer belt.
Caution
7
Do not touch the transfer belt. Touching it may cause image
failure.
8
9
If the misfed paper is gripped between the rollers,
remove it by rotating the lever in the direction shown.
9
10
11
10
If the misfed paper cannot be removed in step 9,
raise the exit guide of the fuser unit and remove
it.
12
9-14
WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
SYMBOL (Cont.)
symbol flashes as shown on the
Fuser unit
Transfer belt
Exit guide