Table of Contents
Advertisement
2. SIMPLE TROUBLESHOOTING
Check the following items, and if the problem still occurs, call service for assistance.
1
Caution
NEVER attempt to repair, disassemble or modify the equipment by yourself. You could cause a fire or
2
get an electric shock.
ALWAYS contact your Service representative for maintenance or repair of the internal parts of the
equipment.
3
Items to be checked
Is the power cord plug firmly in-
4
serted in the outlet?
Are the front covers (left and
right), the exit cover and the
5
large-capacity feeder (optional)
firmly closed?
Is the bypass guide firmly
6
closed?
7
Display does not change when keys or icons are pressed
Is the copier in the energy sav-
8
ing mode (Automatic Energy
Saving mode)?
Is the access code keyed in? Is
9
the access code correct?
Is the "Warming up" message
10
displayed?
Does the administrator pass-
word input screen appear?
11
Is interrupt copying set?
12
10-4
MAINTENANCE
Copier does not start
Insert the power cord plug firmly.
Close the covers properly.
Close the bypass guide unit properly.
Press the
key on the control panel to clear the mode. (It
takes a while for the copier to become ready.)
Key in the correct access code.
* If the access code is not clear, ask your copier
manager.
Wait until the copier becomes ready.
The administrator password is required. Ask
your copier manager.
Press the
panel to clear the mode.
Countermeasure
ENERGY SAVER or
INTERRUPT key on the control
Reference page
Page 1-2, 9-4
Page 9-13
START
Page 1-4, 6-33
Page 1-9
Page 1-8
Page 6-23
Page 2-17
Advertisement
Table of Contents
