Hardware Setup Of Central Station; Hardware Setup Of The Engineering Station - Siemens SIMATIC S7-1200 CP 1242-7 V2 Application Example

5 Installation and Commissioning
5.1 Installing the hardware
5.1.2

Hardware setup of central station

Figure 5-2 below shows the hardware setup of the central station.
Figure 5-2
Industrial Ethernet
Table 5-2
No.
1.
2.
5.1.3

Hardware setup of the engineering station

The figure below shows the hardware setup of the engineering station.
Figure 5-3
Engineering Station
Industrial Ethernet
Table 5-3
No.
1. Establish an internet connection at your engineering station.
Possible access methods:


TeleService with TCSB
Entry-ID: 56720905, V1.0,
Central Station
TCSB V3
172.16.61.100
Connect your PC on which TeleControl Server Basic runs to the router via
Ethernet.
If the DSL (broadband) modem is not integrated in the router, connect the router
to the DSL modem.
172.16.61.100
Access via UMTS (e. g. USB-Stick)
Access via DSL (e. g router with integrated DSL-modem).
10/2016
DSL Router
Fixed IP address
Action
DSL Router
Fixed IP address
Action
Internet
(DSL connection)
172.16.0.1
Internet
(DSL connection)
172.16.0.1
21