Configuration And Settings; Configuring The Remote Station - Siemens SIMATIC S7-1200 CP 1242-7 V2 Application Example

4 Configuration and Settings

4.1 Configuring the remote station

Configuration and Settings
4
Note The project included in this application example has already been configured for
you. Chapter 4 explains the implemented work steps again.
The configuration is done with the following configuration tools:

STEP 7 V13 SP1:
–
Configuration of a remote station (S7-1200 CPU with CP 1242-7 GPRS
V2) for data communication with the central station via mobile
communications network and the Internet
–
Configuration of a remote station (S7-1200 CPU with CP 1242-7 GPRS
V2) for remote maintenance (TeleService) by a service operator

TCSB V3:
–
create and configure a project
–
create and configure connections
–
configure general parameters
4.1 Configuring the remote station
The table below shows how to configure a S7-1200 station with the
with the CP 1242-7 GPRS V2 for data communication with the central station via
mobile communications network and the Internet and for remote maintenance
(TeleService).
Table 4-1
No.
1. Create a STEP 7 V13 project.
2. Add the S7-1200 CPU (as of V4.1) for the SIMATIC station 1.
3. Add the CP 1242-7 GPRS V2 to the station.
TeleService with TCSB
Entry-ID: 56720905, V1.0, 10/2016
Action
13