5 Installation and Commissioning
5.3 Installing the example project
5.3
Installing the example project
Unzip the "*zip" file "56720905_S7_1200_TeleService_PROJ_V10". This folder
contains the following files:
The archived STEP 7 project
"56720905_S7-1200_TeleService_CODE_V10.zip".
The TCSB configuration file "56720905_S7-1200_TeleService.bak".
5.4
Commissioning
5.4.1
Setting the IP addresses
The following table shows the configured IP addresses.
Table 5-6
Station 1:
CPU 1217C DC/DC/DC
Programming unit
PC/PG central station (TCSB)/
Engineering Station
LAN IP address of router
5.4.2
Assigning the IP address to the engineering station
Change the network settings of your engineering station as shown in the following
table.
Table 5-7
No.
1.
2.
3.
TeleService with TCSB
Entry-ID: 56720905,
V1.0,
Module
192.168.0.1
192.168.0.100
172.16.61.100
172.16.0.1
Open the "Internet Protocol (TCP/IP) Properties" via Start > Settings > Network
Connection > Local Connections.
(„Start > Settings > Network Connection >Local Connections").
In the open window, select the Internet Protocol (TCP/IP) and open Properties.
Fill in the boxes as shown in the figure.
Close the dialog box with "OK".
10/2016
IP address
255.255.255.0
255.255.255.0
255.255.0.0
255.255.0.0
Action
Subnet mask
23